Boomr Bin Monotub Automated Tech Kit

Good find. This product is part of the sale.
Get early access to savings before the holiday rush.
Shop the entire sale now
Trusted by 350K+ Growers
Money Back Guarantee
Free Shipping over $199
Upgrade your Boomr Bin Monotub with this automated tech kit, featuring a fresh air fan, humidifier with hose, monotub hose connector, and humidity controller with sensor. This easy-to-install kit allows you to upgrade your Boomr Bin to allow for better control of humidity, CO2 levels, and fresh air exchange. Plus, the fan also includes a removable washable screen for better spore filtration.
Automated system includes:
- (1) FAE Fan Mini w/ Power Control
- (1) Myco-Mister Mini Humidifier w/ hose
- (1) Monotub Hose Connector
- (1) MYCOntroller Humidity Controller (Hygrometer)
Using automated tech kit:
- Once monotub is fully colonized, remove the self-adhesive filters on one end of the lid to hook up the FAE Fan Mini and Myco-Mister Mini Humidifier with hose.
- On the opposite end of the lid, cut a one-inch slice into the 2" filter and slide the MYCOntroller Humidity Controller probe inside.
- These additions will allow you to optimize fresh air exchange, CO2 levels, and humidity levels for the specific species you are growing.
Tech specifications
Myco-Mister Mini Humidifier
- Capacity: 4L
- 110-240V; 50/60Hz
- Max Usage Area: 215 Sq ft
- Max Evaporation: 380ml/H
- Size: 6.5" (Diameter) x 12" (Height)
FAE Fan Mini
- 110-220VAC/50Hz
- 0.05A (Max. 0.06A)
FAE Fan Power Controller
- AC/DC Adapter
- Input: AC100-240V; 50/60Hz
- Output: 3V-12V—2A
MYCOntroller Humidity Controller
- 110-220V
- Measurement range: 0%RH-99%RH
- Control accuracy: 0.1%RH
- Output type: Direct output
- Output capacity: Max 10A
User guide
Humidifier instructions
FAE Fan instructions
Humidity controller instructions
- First, plug the humidity controller device into wall.
- Next, set humidity range.
- Press and hold the "UP" button for 3 seconds, and the humidity value will flash. Set the high value. (For example, 90%)
- Wait for a few seconds to automatically return to main interface.
- Press and hold the "DOWN" button for 3 seconds, and the humidity value will flash. Set the low value. (For example, 75%)
- Finally, plug humidifier into device.
- Humidifier will turn ON when device falls below the lowest humidity setting and OFF when it reaches the highest humidity setting.
Maintenance & storage
WARNING: Do not clean humidifier while the unit is switched on. Turn off the power and unplug the unit from its power source before any cleaning or maintenance.
HUMIDIFIER WATER TANK
- DO NOT leave water sitting stagnant in tank for more than a couple of days as it may cause bacterial growth. Always empty tank if not planning to use it for a few days.
HUMIDIFIER STORAGE
- When not in use, store in a cool dry location in original packaging or completely covered (to prevent dust buildup).
- If water is left in the unit during storage, it may harden and leave deposits that may affect the unit from operating properly.
- Leave the cap of the water tank loose during storage. This will prolong the life of the gasket.
HUMIDIFIER CLEANING
- DO NOT use detergents or chemicals to clean the tank or base as it can interfere with the mist.
- If the water tank is dirty, soak it with a mild bleach and water solution (1 cup of bleach + 1 gallon of water) and rinse clean.
- Wipe the exterior of the body with a damp cloth.
- Clean and rinse the water tank and mist nozzle with lukewarm water frequently to avoid mineral buildup.
- Keep the nebulizer and water sensor free of mineral deposits.
- Only clean the nebulizer and sensor with a soft brush (e.g. soft toothbrush).
- DO NOT scrape the nebulizer or water sensor to avoid damage.
- DO NOT clean with tools that have metal parts.
- DO NOT spray water or any liquids onto the control knob.
- NEVER immerse the base in water or let water enter other openings.
Related Articles
Frequently Asked Questions