Kit technique automatisé Boomr Bin Monotub

Myco-Mister Mini Humidifier

• Capacity: 4L
• 110-240V; 50/60Hz
• Max Usage Area: 215 Sq ft
• Max Evaporation: 380ml/H 
• Size: 6.5" (Diameter) x 12" (Height)

FAE Fan Mini

• 110-220VAC/50Hz
• 0.05A (Max. 0.06A)

FAE Fan Power Controller

• AC/DC Adapter
• Input: AC100-240V; 50/60Hz
• Output: 3V-12V—2A

MYCOntroller Humidity Controller

• 110-220V
• Measurement range: 0%RH-99%RH
• Control accuracy: 0.1%RH
• Output type: Direct output
• Output capacity: Max 10A

Click here to download pdf

Click here for PDF

Click here for PDF

• First, plug the humidity controller device into wall.
• Next, set humidity range.
  • Press and hold the "UP" button for 3 seconds, and the humidity value will flash. Set the high value. (For example, 90%)
  • Wait for a few seconds to automatically return to main interface.
  • Press and hold the "DOWN" button for 3 seconds, and the humidity value will flash. Set the low value. (For example, 75%)
• Finally, plug humidifier into device.
• Humidifier will turn ON when device falls below the lowest humidity setting and OFF when it reaches the highest humidity setting.

WARNING: Do not clean humidifier while the unit is switched on. Turn off the power and unplug the unit from its power source before any cleaning or maintenance.

HUMIDIFIER WATER TANK

• DO NOT leave water sitting stagnant in tank for more than a couple of days as it may cause bacterial growth. Always empty tank if not planning to use it for a few days.

HUMIDIFIER STORAGE

• When not in use, store in a cool dry location in original packaging or completely covered (to prevent dust buildup).
• If water is left in the unit during storage, it may harden and leave deposits that may affect the unit from operating properly.
• Leave the cap of the water tank loose during storage. This will prolong the life of the gasket.

HUMIDIFIER CLEANING

• DO NOT use detergents or chemicals to clean the tank or base as it can interfere with the mist.
  • If the water tank is dirty, soak it with a mild bleach and water solution (1 cup of bleach + 1 gallon of water) and rinse clean.
  • Wipe the exterior of the body with a damp cloth.
  • Clean and rinse the water tank and mist nozzle with lukewarm water frequently to avoid mineral buildup.
• Keep the nebulizer and water sensor free of mineral deposits. 
  • Only clean the nebulizer and sensor with a soft brush (e.g. soft toothbrush).
  • DO NOT scrape the nebulizer or water sensor to avoid damage.
  • DO NOT clean with tools that have metal parts.
• DO NOT spray water or any liquids onto the control knob.
• NEVER immerse the base in water or let water enter other openings.