Automated 'Boomr Bin' + Dung-Loving Substrates Monotub Kit
⚠️ Not included | Spore or liquid culture syringe |
📦 Shipping | Ships in 2 separate boxes |
Dimensions | 22”(W) x 15”(D) x 11”(H) |
The first fully automated monotub system!
Improve the quality and size of your mushroom grow with our beginner-friendly Automated Boomr Bin Monotub System. This self-contained, fully automated mushroom fruiting and incubation chamber gives you optimal control of humidity, CO2 levels, fresh air exchange, and spore filtration. And it's ideal for all skill levels, whether you're new to monotubs or a seasoned grower.
Automated monotub kit includes:
- (1) Boomr Bin monotub
- (1) FAE Fan Mini w/ power control
- (1) Myco-Mister Mini humidifier w/ hose
- (1) Monotub hose connector
- (1) Mycontroller humidity controller (hygrometer)
Substrate kit includes:
- (3) Boomr Bag sterile manure substrate (5 lbs each)
- (1) Sterilized grain bag with injection port (3 lbs)
- (1) Myco Coco compressed coco coir (3.4L)
- (1) Sheet of 1" monotub filters
- (1) Sheet of 2" monotub filters
Colonization:
- During the colonization phase, cover all monotub holes with self-adhesive filters to promote even gas exchange with protecting against contaminants, like foreign spores and bacteria.
Fruiting:
- Once monotub is fully colonized, remove the self-adhesive filters on one end of the lid to hook up the FAE Fan Mini and Myco-Mister Mini Humidifier with hose.
- On the opposite end of the lid, cut a one-inch slice into the 2" filter and slide the Mycontroller Humidity Controller probe inside.
- These additions will allow you to optimize fresh air exchange, CO2 levels, and humidity levels for the specific species you are growing.
Boomr Bin features:
- Recessed base for stacking multiple monotubs.
- Food-grade materials FDA-approved for contact with consumables.
- Compact durable design holds up to 25 pounds of substrate.
- Latches attached to base to prevent lid from popping off when picking up.
- Extra large latches with recessed grips for easy lifting and transport.
- Large rounded corners for easy cleaning and fewer places for contaminants to hide.
- Row of 1” holes placed lower in the lid to prevent fuzzy stems.
- Black light-blocking base helps colonization and aids in preventing side pinning.
- Modular design accepts automated fresh air and humidity systems.
- Dimensions: 22”(W) x 15”(D) x 11”(H)
"The Complete Boomr Bin Monotub Tek Guide"
Spawn to bulk ratio:
We recommended mixing 1 colonized grain spawn bag with 2-3 Boomr Bags. (Higher inoculation rates may improve your success.)
Optional add-ons:
Important notice:
⚠️ Using tap water with a high mineral content (aka "hard water") with any humidifier can cause a fine white dust build to up and/or to be emitted. To avoid this, use distilled or demineralized water. Or, add a demineralization cartridge to the water tank. (This can be done by removing the top cover and placing the cartridge inside.)
Scroll down for tech specifications and instructions.
-
Myco-Mister Mini Humidifier
- Capacity: 4L
- 110-240V; 50/60Hz
- Max Usage Area: 215 Sq ft
- Max Evaporation: 380ml/H
FAE Fan Mini
- 110-220VAC/50Hz
- 0.05A (Max. 0.06A)
FAE Fan Power Controller
- AC/DC Adapter
- Input: AC100-240V; 50/60Hz
- Output: 3V-12V—2A
MYCOntroller Humidity Controller
- 110-220V
- Measurement range: 0%RH-99%RH
- Control accuracy: 0.1%RH
- Output type: Direct output
- Output capacity: Max 10A
-
- First, plug the humidity controller device into wall.
- Next, set humidity range.
- Press and hold the "UP" button for 3 seconds, and the humidity value will flash. Set the high value. (For example, 90%)
- Wait for a few seconds to automatically return to main interface.
- Press and hold the "DOWN" button for 3 seconds, and the humidity value will flash. Set the low value. (For example, 75%)
- Finally, plug humidifier into device.
- Humidifier will turn ON when device falls below the lowest humidity setting and OFF when it reaches the highest humidity setting.
-
Boomr Bin & FAE Fan
We recommend cleaning your monotub between each use to keep all surfaces as sterile as possible.
- Wipe down all surfaces to remove dirt and spores with a soft cloth soaked in warm water.
- Sanitize by spraying with a 70% isopropyl alcohol solution inside and out.
- DO NOT use bleach or abrasives.
MycoMister Mini Humidifer
Full instructions can be found in instruction guide. Click here for PDF
-
North Spore's products shall be used only for lawful purposes. North Spore does not condone Psilocybin (Psilocybe cubensis) or hallucinogenic (magic) mushroom growing in jurisdictions where it is currently illegal.
*Free shipping only applies to the contiguous 48 U.S. states and does not apply to Hawaii, Alaska, or U.S. Territories.
You may also like
- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Great!
Awesome products and everything was shipped extremely fast!
North Spore
Thanks, Billy! We really appreciate your support.
Fast delivery
Everything arrived in a timely manner. So far so good.
North Spore
Thanks, Ace! We really appreciate your support.